Vertical profile VP 50

The efficient aluminium vertical mullion 50 x 50 mm for photovoltaic curtain façades

Applications

Suitable for:
Powerskin system
with:

  • Fixing point holder FPH
  • Sliding point holder SPH

Versions

  • Aluminium alloy AW 6060 T66 according UNI EN 755-2:2013

Features

  • Handy: the vertical profile VP 50 is easy to work (cut and drill) on site.
  • Double face: the vertical profile VP 50 can be used on both front and rear faces.
  • Adjustable fixing: using the vertical profile VP 50 front face (with channel), the channel nut FCN and screw SKS M 8 is possible to carry out an adjustable fixing.
  • Heavy-duty fixing: using the vertical profile VP 50 on the rear face (blind side) and with rivets it is possible for high load-bearing capacity fixing.
  • Use the wall brackets FPH and SPH for fixing the vertical profile VP 50, depending on the cavity required.
  • Place the vertical profile VP 50 between the wall brackets FPH and SPH cantilevers.
  • Use wall brackets FPH and SPH as a drill template and drill the vertical profile VP 50 (FPH – 5+5 drills holes, SPH – 1+1 drill holes) with a Ø5 mm drill bit. ▪▪ Fasten the vertical profile VP 50 to the wall brackets FPH and SPH with rivets 4,8 x 10 A2.
  • Put the insulation panels behind the vertical profile VP 50.