Vertical profile VP 100
The heavy-duty aluminium vertical mullion 50 x 100 mm for photovoltaic curtain façades without middle fixing
Applications
Suitable for:
Powerskin system with:
- Fixing point holder FPH
- Sliding point holder SPH
Versions
- Aluminium alloy AW 6060 T66 according UNI EN 755-2:2013
Features
- Handy: the vertical profile VP 100 is easy to work (cut and drill) on site.
- Double face: the vertical profile VP 100 can be used on both front and rear faces.
- Adjustable fixing: using the vertical profile VP 100 front face (with channel), the channel nut FCN and screw SKS M 8 is possible to carry out an adjustable fixing.
- Heavy-duty fixing: using the vertical profile VP 100 on the rear face (blind side) and with rivets it is possible for high load-bearing capacity fixing.
- Using the wall brackets FPH and SPH for fixing the vertical profile VP 100, depending the cavity required.
- Place the vertical profile VP 100 between the wall brackets FPH and SPH cantilevers. ▪▪ Use wall brackets FPH and SPH as a drill template and drill the vertical profile VP 100 (FPH – 5+5 drills holes, SPH – 1+1 drill holes) with a Ø5 mm drill bit.
- Fasten the vertical profile VP 100 to the wall brackets FPH and SPH with rivets 4,8 x 10 A2.
- Put the insulation panels behind the vertical profile VP 100.