Universal tile hook with basement GTLB

The adjustable hook for flat tiles roofs with base plate and horizontal adjustment


Useful for:
Pitched roof system with:

  • Profile Solar-fish


  • hook in stainless steel X5CrNi 18-10 according to EN 10088-2:2005
  • bolts and nuts in stainless steel A2-70 according to EN ISO 3506-1/2;2010


  • Complete: the pre-assembled hook is supplied with XC bracket, base plate, bolts and nuts for profile connection.
  • Fast: quick installation of Solar profiles through the tightening of only one screw.
  • Safe fixing: the adjustable connection is equipped with anti-slip knurlings.
  • Flexible: the hook fits all kind of tiles thanks to vertical adjustment. Moreover horizontal adjustment is possible through the sliding guides on the base plate
  • Adaptive: the holes Ø 10,5 mm of enlarged base plate allow hook’s fastening on the load-bearing structure of substrate.
  • Hooks spacing has to be evaluated depending on snow and wind loads for installation area, according National Regulations.
  • Adjust hooks position depending on load-bearing structure and on layout PV installation.
  • Move tile and fasten hook’s plate base with the proper anchor depending on building material of substrate.
  • Tighten up the screws of adjustable brackets before installing the profiles.