Profile Solar-mid

The heavy-duty aluminium profile suitable for photovoltaic installations with large spacing support

Applications

Suitable for:

Flat surface system with:

  • Triangular frame STFP 30°

Special application system with:

  • Special structures built using profiles TP AL, REP AL and BP AL

Photovoltaic field system with:

  • Structure Solar-field

Versions

  • Aluminium alloy AW6063 T6 according to UNI EN 755-2:2013

Features

  • Heavy duty: The Solar-mid profile is strong enough to reduce the spacing between supports.
  • Flexible: The shape of profile Solar-mid allows the fixing of two PV modules (landscape disposition) on one middle profile.
  • Easy and fast: quick installation in the lower and lateral channel through screw SKS M 8 or T-head screw RH S 8 x 20 and in the upper channel through channel nut FCN AL and joint bracket MW (for cross joint).
  • No scrap: the optimized length reduces waste and facilitates handling on site.
  • Maximum allowable spacing 2500 mm, depending on snow and wind loads calculated according current National Regulation.
  • Define triangular frames/structures spacing depending on snow and wind load for the effective installation area.
  • Fasten the profile on the angular frames/structures using lower channel (with screw SKS M 8 or T-head screw RHS) or lateral channels (with joint bracket MW and screw SKS M 8 or T-head screw RHS).
  • Use a couple of joints CPN AL on the lateral channels to link the profiles Solar-mid. The connection is completely closed when the mark on the middle of joints is in contact with the profiles.
  • attention To avoid problems related to thermal expansion the maximum suggested lenght of a PV panels row is 15 m.
  • attention If the connection is on the side spans, the joints CPN AL have to be fixed with self drilling screws.