Profile Solar-fish

The universal aluminium profile for photovoltaic installations on both pitched roofs and flat surfaces


Suitable for Pitched roof system:

  • Hook GT U
  • Hook GT UB
  • Hook GT 130 – 8 mm
  • Hook GT 150 – 8 mm
  • Hook GTR
  • Hook GTT
  • Hook GTP
  • Hook GTPR

Suitable for Flat surface system:

  • Triangular frame STFS 10° – 13°
  • Triangular frame STFN 10°- 15°
  • Triangular frame STFN 25° – 30° – 35°
  • Triangular frame STFE 25°


  • Aluminium alloy AW6063 T6 according to UNI EN 755-2:2013


  • Universal: the aluminium profile Solarfish is suitable for both pitched roof and surface PV installations.
  • Easy and fast: quick installation in the lower and lateral channel through screw SKS M 8 or T-head screw RH S 8 x 20 and in the upper channel through channel nut FCN AL and joint bracket MW (for cross joint).
  • No scrap: the optimized length reduces waste and facilitates handling on site.
  • Maximum allowable spacing 1800 mm, depending on snow and wind loads calculated according current National Regulation.
  • Select the profile combination to suit the array.
  • Select hooks/triangular frames spacing depending on the wind and snow loads at the installation site.
  • Fasten the profile on the hooks using lower channel (with screw SKS M 8 or T-head screw RHS) or lateral channels (with joint bracket MW and screw SKS M 8 or T-head screw RHS).
  • Use a couple of joints CPN AL on the lateral channels to link the profiles Solar-fish. The connection is completely closed when the mark on the middle of joints is in contact with the profiles.
  • attention To avoid problems related to thermal expansion the maximum suggested lenght of a PV panels row is 15 m.
  • attention If the connection is on the side spans, the joints CPN AL have to be fixed with self drilling screws.