Profile Solar 40/30

The aluminium profile for photovoltaic installations on industrial roof for parallel fixing to corrugated sheet ribs

Applications

Suitable for Industrial roof system

  • Installation on profile Solar 40/30 6 m for isolated layouts (layout length is equal to profile length)
  • Installation with profile pieces Solar 40/30 200 mm for wide layouts.
  • Horizontal panels Installation with vertical profiles (Solar 40/30 6 m or Solar 40/30 200 mm)

Versions

  • Aluminium alloy AW6060 T6 according UNI EN 755-2:2013

Features

  • Fast: quick installation on industrial roofs through the rivets RS AL.
  • Easy: quick PV module installation with pre-assembled clamps and easy cross connections through the upper channel using channel nut FCN AL, joint bracket MW, and hex head screw SKS M 8.
  • Choose more suitable installation between whole profile Solar 40/30 6 m and profile pieces Solar 40/30 – 200 mm.
  • Rivets RS AL spacing has to be evaluated depending on corrugated sheet ribs spacing and snow and wind loads for installation area.
  • Put pieces of butylene tape CG INT (minimum piece’s length 80 mm) on the contact area between profile Solar 40/30 – 6 m/200 mm and the ribs of corrugated sheet, to avoid galvanic corrosion.
  • Put the profile Solar 40/30 – 6 m/200 mm on the corrugated sheet and drill together profile and corrugated sheet with a Ø 5,3 mm drill bit.
  • Fasten profile Solar 40/30 – 6 m/200 mm on the corrugated sheet with rivets RS AL.