Pre-assembled clamp SPS-PM

The pre-assembled middle and final clamps for free-fields system SPS, SPTS and DFS

Applications

Suitable for:
SPS System and DFS System with:

  • Profile SPS-HP

SPTS System with:

  • Profile SPTS-VP

Anti-theft bronze ball DAE can be used

Versions

  • Clamps SPS-PMC and SPS-PMF in aluminium alloy AW6060 T66 according to UNI EN 755-2:2013
  • Hexagon socket cylindrical head screw in stainless steel A2-70 according to EN ISO 3506-1:2009
  • Channel nut in S235JR steel according to EN 10025-2:2004, coating protection according to ISO 4520:1981/EN ISO 2081:2008

Features

  • Full range: the pre-assembled clamps  SPS-PM can fasten all PV modules  with thickness in range 31 ÷ 50 mm.
  • Fast: through the smart channel nut the pre-assembled clamps SPS-PM can be hooked and quick blocked in any point of the profile.
  • Easy: through their spring the pre-assembled clamps SF-PM stay up during the fastening operation.
  • Complete: the pre-assembled clamps SPS-PM do not need any further accessory (e.g. screws, washers, nuts).
  • Put the channel nut of the pre-assembled clamps SPS-PM into the profile upper channel.
  • Rotate the pre-assembled clamps SPS-PM clockwise by 90 degrees.
  • Fasten the PV module tightening the hexagon socket cylindrical head screw, applying the right installation torque (10 Nm).
  • (Optional) To protect the installation put the anti-theft bronze ball DAE into the screw hexagon socket.