Pre-assembled clamp PM

The pre-assembled middle and final clamps for photovoltaic modules with aluminium frame

Applications

Suitable for:

  • Pitched roof system
  • Flat surface system
  • Industrial roof system
  • Corrugated roof system
  • Special application system
  • Powerskin system

To fasten PV modules on the profiles:

  • Solar-light
  • Solar-fish
  • Solar-mid
  • Solar-premium
  • Solar-flat
  • Solar 40/30

Anti-theft bronze ball can be used

Versions

  • Clamps PM C e PM F in aluminium alloy AW6060 T66 according to UNI EN 755-2:2013
  • Hexagon socket cylindrical head screw TCEI in stainless steel A2-70 according to UNI EN ISO 3506-1:2010
  • Channel nut FCN AL in aluminium alloy AW6060 T66 according to UNI EN 755-2:2008 and nylon PA6 grey

Features

  • Full range: the pre-assembled clamps PM C and PM F can fasten all PV modules with thickness in range 31÷52 mm.
  • Fast: through the smart channel nut the pre-assembled clamps PM C and PM F can be hooked and quick blocked in any point of the profile.
  • Easy: through their spring the preassembled clamps PM C and PM F stay up during the fastening operation and through their plastic element it do not slide on the profile.
  • Complete: the pre-assembled clamps PM C and PM F do not need any further accessory (e.g. screws, washers, nuts)
  • Put the channel nut of the pre-assembled clamps PM C and PM F into the profile upper channel.
  • Rotate the universal pre-assembled clamps PM C and PM F clockwise for 90°.
  • Fasten the PV module applying the correct installation torque (10 Nm) on the hexagon socket cylindrical head screw TCEI.
  • (Optional) To protect the installation put the anti-theft bronze DAE ball into the screw hexagon socket.