Point fixing holder FPH

The point fixing holders for every hollow space for photovoltaic curtain façades

Applications

Suitable for:

  • Powerskin system

With:

  • Vertical profile VP 50
  • Vertical profile VP 100

Versions

  • Aluminium alloy AW 6063 T66 according to UNI EN 755-2:2013

Features

  • Full-range: the fixing point holders FPH wide range, with different depths, allows the possible adjustment in vertical direction and the positioning of insulation panels with different thickness behind the PV curtain façade.
  • Adjustable: the slotted holes guarantee the fixing point holder FPH horizontal adjustment.
  • Handy: the fixing point holder FPH is very light and easy to handle on site.
  • Concrete
  • Solid brick masonry
  • Perforated brick masonry
  • Aerated concrete block (AAC)

Fasten the fixing point holder FPH using the correct anchor (see fischer General Catalogue):

  • Concrete: use stainless steel high performance steel anchors FAZ II A4.
  • Solid brick masonry: use stainless steel threaded rods FIS A A4 and vinylester injection mortar FIS V.
  • Perforated brick masonry use stainless steel threaded rods FIS A A4, injection anchor sleeve FIS HK or injection anchor sleeve with net FIS HN and vinylester injection mortar FIS V.
  • Aerated concrete blocks: use stainless steel threaded rods FIS A A4, centring sleeve PBZ and vinylester injection mortar FIS V in undercut application (with cone drill PBB).
  • If the building material is different it is necessary to assess it experimentally though tests on site.