Kit Easy Solar Kit STSR

Kit Easy Solar for the installation of four modules in portrait position on corrugated roof

Applications

Suitable for:

  • Corrugated roof
  • Tiles roof

Features

  • All in one: All items needed to install 4 PV modules in portrait position are inside the kit.
  • Universal: Inside the kit there are 10 stud screws STSR for the fixing on corrugated roof, 10 joint plate SSP SPEED for an easily installation, 8 Solar fish profile 1,10 mt length, 12 joint CPN AL for connect the profiles and 10 universal clamp PMU for all PV modules with thickness in range 30-52 mm.
  • Easy to move: packaging dimension only 1200 x 290 x¬† 85 mm with the profiles inside.
  • Easy to assembly: Inside the kit there is also an instruction leaflet to make the installation easier.

Kit Easy Solar for the installation of four modules in portrait position on corrugated roof

  • Define the stud screw STSR position according to support structure (max spacing 1.0 mt).
  • Drill the load bearing support structure and fasten the STSR leading the EPDM washer in contact with the roof
  • Tighten the flanged¬† hex nut MU F on the EPDM washer for water proofing.
  • Secure the joint bracket SSP adjusting the distance from the roof through the other 2 flanged hex nuts MU F.
  • Put the smart channel nut of the universal pre-assembled clamp PMU into the profile upper channel.
  • Rotate clamp clockwise to use as final clamp or counter clockwise to use it as middle clamp.
  • Fasten the PV module tightening the hexagon socket cylindrical head screw TCEI, applying the right installation torque (10 Nm).
  • (Optional) To protect the installation put the anti-theft bronze ball DAE into the screw hexagon socket.