Kit Easy Solar Kit Solar-Flat P 400

Kit Easy Solar for installation of four mudules in portrait position on industrial roof with corrugated sheet ribs


Suitable for:

  • Industrial roof with corrugated sheet ribs


  • All in one: All items needed to install 4 PV modules in portrait position are inside the kit.
  • Universal: inside the kit there are 10 profiles Solar-Flat P 400, usable for each kind of corrugated metal sheet, 40 rivets RS AL 5,2 x 20 mm for the fixing, 10 universal pre-assembled clamp PM U,for all PV modules with thickness in range 30-52 mm and 1 mt of butilic tape CG INT.
  • Easy to move: packaging dimension only 1200 x 290 x  85 mm with the profiles inside.
  • Easy to assembly: Inside the kit there is also an instruction leaflet to make the installation easier.
  • Put pieces of butylene tape CG INT (minimum piece’s length 80 mm) on the contact area between profile Solar-flat P 400 and the ribs of corrugated sheet, to avoid galvanic corrosion.
  • Put the profile Solar-flat P 400 on the corrugated sheet and drill together profile and corrugated sheet with a Ø 5,3 mm drill bit.
  • Fasten profile Solar-flat P 400 on the corrugated sheet with rivets RS AL.
  • Put the smart channel nut of the universal pre-assembled clamp PMU into the profile upper channel.
  • Rotate clamp clockwise to use as final clamp or counter clockwise to use it as middle clamp.
  • Fasten the PV module tightening the hexagon socket cylindrical head screw TCEI, applying the right installation torque (10 Nm).
  • (Optional) To protect the installation put the anti-theft bronze ball DAE into the screw hexagon socket.