Cross connectors XC and PXC

The connector with lateral fixing for hook - Solar profile connection or profiles Solar cross connection (90° degrees)

Applications

Suitable for:

  • Special application system

For the connection of:

  • Profile Solar-fish
  • Profile Solar-mid
  • Profile Solar-premium

Versions

  • Cross connector XC in aluminium alloy AW6060 T66 according to UNI EN 755-2:2013
  • Hexagon socket cylindrical head screw TCEI in stainless steel A2-70 according to UNI EN ISO 3506-1:2010
  • Channel nut FCN AL in aluminium alloy AW6060 T66 according to UNI EN 755-2:2013 and nylon PA6 grey

Features

  • Fast: fixes directly to the all profiles by the tightening of 1 screw.
  • Complete: the pre-assembled cross connector PXC does not need any further accessory (e.g. screws, washer, nuts).
  • Safe fixing: the cross connector XC has a large contact surface area that increases the connection for loadbearing capacity.

Hook – profile Solar connection:

  • Connect the cross connector XC to the hook GT/GTR/GTT/GTP/GTPR/GC using hex head screw SKS M 8 and hexagonal nut MU M 8.
  • Apply the upper Solar profile to the cross connector XC hook.
  • Tighten the connection applying the correct installation torque (10 Nm) on the hexagon socket cylindrical head screw TCEI.

Crossed connection:

  • Connect the cross connector XC to the lower Solar profile, upper channel, using the channel nut FCN AL M 8 and screw SKS M 8; rotate it clockwise 90°.
  • Apply the upper Solar profile to the cross connector XC/PXC hook. ▪▪ Tighten the connection applying the correct installation torque (10 Nm) on the hexagon socket cylindrical head screw TCEI. Versions
  • Cross connector XC in aluminium alloy AW6060 T66 according to UNI EN 755-2:2013
  • Hexagon socket cylindrical head screw TCEI in stainless steel A2-70 according to UNI EN ISO 3506-1:2010
  • Channel nut FCN AL in aluminium alloy AW6060 T66 according to UNI EN 755-2:2013 and nylon PA6 grey